Energy Heritage
← All guides

Fabric & ventilation

Draught proofing an older home without losing necessary ventilation

A cold draught around a window and an air vent are not the same thing. The aim is to reduce unwanted air leakage while keeping the ventilation your home and its appliances need.

Energy Heritage · Published 16 November 2026 · 4 min read

Close view of a painted timber sash window and brass fastener

Start with an observation list

Walk around the rooms you use most on a breezy day. Note where you notice air movement near closed windows or external doors. Look for visible gaps and damaged joinery without dismantling anything. Do not use a candle or other flame to find a draught. A written list with photographs gives you a more useful starting point than buying several rolls of seal and hoping they fit.

Record the exact location: the edge of an opening window, the letterbox, the bottom of a door or the junction between frame and wall. Include whether the window closes properly and whether the surface is sound. A problem with fit or decay may need a repair rather than a thicker seal.

Identify the openings that must stay open

Energy Saving Trust distinguishes draughts from deliberate ventilation and warns against blocking features such as extractor fans, air bricks, wall vents and window trickle vents. Some ventilation serves a suspended floor or a combustion appliance rather than the room you are standing in. Do not seal an opening whose purpose you cannot identify.

Fireplaces and flues need particular care. Do not block a flue serving an appliance. Get competent advice before changing an unused chimney, including how necessary ventilation will be maintained. Draught proofing should not compromise the safe operation of a fire, stove or boiler.

Choose a repair that suits the window

Historic England recommends considering repairs and appropriate draught proofing as part of improving an older home. Traditional joinery deserves an assessment of its condition before alterations. Secondary glazing is another possible measure, but its detailing and ventilation need thought; Historic England specifically cautions against draught proofing the original window when fitting secondary glazing because of condensation risk between the layers.

When asking for a quote, specify which windows are affected and what you want to preserve. Ask how the proposal deals with opening, closing, cleaning, maintenance and ventilation. For a historic or listed property, check requirements with the relevant local authority before work that may affect its character. A product advertised for “period homes” is not proof that it suits your particular window.

Make comfort and moisture part of the follow-up

After work, record whether the original draught has improved and whether the window or door still works correctly. Keep an eye on new or worsening condensation and report it to the installer. Do not assume that a room feeling warmer means every part of the work is performing well.

Keep existing ventilation in use. Historic Environment Scotland’s advice on traditional buildings also emphasises retaining adequate ventilation when draught proofing. If there is persistent damp or mould, seek an assessment of the cause rather than repeatedly adding sealant. A leak, a ventilation issue and a cold surface are different problems even when the visible symptom looks similar.

Measure the result without promising a percentage

There is no single saving that can be promised for every old house. For your own comparison, keep meter readings over similar periods and note weather and heating settings. A warmer week can reduce heating use even if no work has been done. Equally, you may choose to use an improvement to make a previously cold room comfortable, rather than to cut consumption by the largest possible amount.

For a simple cost illustration, avoiding 100 kWh of billed gas at an assumed 6p per kWh would reduce the usage charge by £6. That is arithmetic, not a forecast for a draught-proofing job. It excludes any change in standing charges, which normally continue regardless of that consumption reduction. Use the actual tariff from your bill when considering likely savings.

Read our heating guide alongside the work, and keep the invoice, product details and before-and-after photographs. They will help you maintain the improvement and explain what has changed if you later seek a broader retrofit assessment.

Sources & further reading

Checked 16 November 2026. General guidance for UK households; building advice and permissions vary by property and location.

Read next